Formaldehyde in kitchen cabinets from China: ENF, E0, CARB and what to put in the order

Chinese board is graded for formaldehyde under GB/T 39600-2021 as ENF, E0 or E1, with ENF the strictest. Those grades do not replace the rules of your market: composite wood in furniture and cabinets sold in the US must meet TSCA Title VI, which follows CARB Phase 2, with certified panels and labelled goods. Name the board, its grade and its certification in the order, check the marks on site, and confirm current requirements with your importer or testing lab.

What do ENF, E0 and E1 mean on Chinese board?

They are formaldehyde emission grades for wood-based panels under China’s GB/T 39600-2021; ENF is the strictest, then E0, then E1. A Xiaohongshu explainer on environmental grades gives the ENF limit as 0.025 mg/m³ and describes it as China’s highest domestic grade. Custom-cabinet brands increasingly lead with ENF in their marketing; one cabinet brand’s sponsored post pairs the grade with a full 18 mm carcass and scan-to-trace labels.

Two cautions for an importer. First, a Chinese grade is measured by a Chinese method; do not assume it maps one-to-one onto a foreign label with a similar name. Second, the grade belongs to the board, not the cabinet — edges, glue, lacquer and installation add their own emissions. Buyers in China know this: a widely read post in the same search is titled, in effect, “my cabinets are all ENF, so why is my formaldehyde over the limit?”.

Are kitchen cabinets from China CARB compliant?

Only if the composite panels in them are certified and the finished goods are labelled for the US; a Chinese ENF certificate on its own does not show that. In the US, hardwood plywood, particleboard and MDF — including in finished furniture and cabinets — fall under TSCA Title VI, which aligned federal rules with California’s CARB Phase 2. In general that means panels from a mill certified by an approved third-party certifier, labels on the goods or their boxes, and records that let the importer trace the panels. Rules, exemptions and labelling details change, so confirm them with your customs broker or testing lab.

For UK, EU, Australian and Gulf buyers the rules differ; ask your importer which emission class and test method apply. Cabinets from China may also face trade remedies in the US — see антидемпинговые пошлины на кухонные шкафы и тумбы под раковину — and our кухонных гарнитурах page covers how we source them.

Which board should you specify for cabinets and wardrobes?

Choose the board by where it goes, then by grade. A Guangdong homeowner’s guide (515 likes) to ENF boards sums up the trade-offs:

The author leaves E0 boards out altogether because there is a child in the house. Commenters add two practical points: the glue matters as much as the board, and the cut face tells you more than the label. Hinges and slides matter as much as the carcass — see furniture hardware.

Что добавляют комментарии?

The board-guide comments are practical, and pricing is all over the place.

• Quotes vary widely. One reader asked whether RMB 1,050 per square metre for ENF OSB cabinetry was too much; a reply cites RMB 520 from a renovation firm and RMB 398 from a factory online.
• It’s the glue. A short but pointed comment: board quality is mainly about the adhesive.
• Look at the section. Another reader says the cut face shows what a board is really made of.
• How to test at home. Asked how to measure formaldehyde, the Sichuan homeowner suggests a closed room and a meter or repeated test strips, with an air purifier as a rough guide.

How do you check the board grade when the cabinets are made?

Check the marks on the panels, the thickness and the certificate, and match all three to the order. Наша руководство по инспекции мебели describes a Tianjin buyer finding ENF watermarks under a UV torch; the same checks work in a Foshan workshop:

• Grade and brand marks on uncut panels, including UV-visible marks where the mill uses them.
• Thickness at cut edges against the order — carcass and back panel separately.
• Edge banding sealed on all sides, including hidden edges, since raw edges release more.
• For US orders, the panel supplier’s certification and the label wording.

Ask for photos of panel marks during production, not only of finished cabinets; the чек-лист проверки lists the rest.

Does low-emission board mean a low-emission room?

No — adhesives, sealants and soft furnishings can add as much. A Sichuan homeowner (554 likes) moved in about half a month after finishing. They chose ENF board, fixed cabinets with anchors instead of glue, used almost no sealant, and picked natural linen, wool and untreated fabrics, arguing that soft furnishings are a major source of formaldehyde, benzene and VOCs. They tested twice before moving in. For fabric choices, see upholstery fabrics.

Как с этим работает Source Foshan